Xantrex Technology RS2000 manual Fault Messages, Fault Number Message Type Cause Solution

Troubleshooting

Table 4-4 provides a detailed description of the fault messages and solutions. If you are unable to resolve the problem after referring to this table, contact your dealer or Customer Service.

Table 4-4	Fault Messages
Fault		Fault
Number	Message	Type	Cause	Solution
F0	is too hot and has	Automatic	FET1 Over	Clear the fault and attempt
	shut down. See		Temperature Shutdown	restart. Ensure adequate
	guide.			ventilation around the RS2000.
				Reduce AC loads.
F2	is too hot and has	Automatic	FET2 Over	Clear the fault and attempt
	shut down. See		Temperature Shutdown	restart. Ensure adequate
	guide.			ventilation around the RS2000.
				Reduce AC loads.
F3	is too hot and has	Automatic	Transformer Over	Clear the fault and attempt
	shut down. See		Temperature Shutdown	restart. Ensure adequate
	guide.			ventilation around the RS2000.
				Reduce AC loads.
F4	Battery over-temp.	Automatic	Battery Over	Clear the fault and attempt
	Inv/Chg has shut		Temperature Shutdown	restart. Stop charging, check
	down. See guide.			battery voltage and
				temperature. Check for
				excessive ambient temperature
				and adequate ventilation in the
				battery compartment.
F5	is too hot and has	Automatic	Ambient Over	Clear the fault and attempt
	shut down. See		Temperature Shutdown	restart. Ensure adequate
	guide.			ventilation around RS2000.
				Reduce AC loads.
F6	Too many AC loads.	Escalating	AC Overload	Clear the fault and attempt
	Turn some off, clear	Auto Fault.	Shutdown (AC	restart. Reduce AC loads.
	fault, try again.	Must occur	OUTPUT)
		3 times in
		30 seconds
		before
		becoming
		a manual
		fault.

4–12 975-0125-01-01