Troubleshooting
Warning Messages
Warning messages appear on the System Control Panel to alert you to an impending system change. You can retrieve and view the last ten warning messages using the control panel. The warnings have been recorded with a time stamp to let you know the date and time that the warning appeared. See “Warning Types” on page
You can view the most recent fault messages of the RS2000 (up to 20) by selecting Fault Log from the Device Info menu in the RS2000 Advanced Menu.
If several warning messages occur before you can acknowledge or clear them, they are displayed together on a warning list. This list contains messages from every
To view a message from a warning list:
1.On the list, use the up arrow or down arrow button to highlight the message you want to view.
2.Press Enter.
The complete message appears.
After viewing the message, you can return to the warning list by pressing Exit or continue to the menu for the device that caused the fault by pressing Enter. Each time you return to the list after viewing a complete message, the viewed message is removed from the list.
If you have left the warning list, you can view them at any time from the System Settings menu.
To view a fault list:
1.On the Select Device menu, highlight System and press Enter.
2.On the System Settings menu, highlight View Warning List.
3.Press Enter.
