Xantrex Technology RS2000 manual On Start Up, System button

Operation

Table 2-1System Control Panel Features and Buttons

Feature Description

4Fault light indicates a condition that requires user attention and intervention. The Fault light illuminates when any Xanbus-enabled device connected to the network is in fault. See “Faults and Warnings” on page 4–2for the definitions of a fault and warning.

5Enter button

•Confirms selection of a menu item.

•Moves you to the next screen.

6Up arrow button

•Scrolls up one line of text.

•Increases a selected value.

7Down arrow button

•Scrolls down one line of text.

•Decreases a selected value.

8Exit button

•Cancels selection of a menu item.

•Returns you to the previous screen.

9System button:

•Toggles all Xanbus-enabled devices on the system between Operate mode and Power Save mode. See “System Modes” on page 2–6.

10Screen displays menus, settings, and system information.

On Start Up

When the RS2000 is powered up or comes out of a reset state, all of the front panel lights illuminate and remain on for a minimum of five seconds. After five seconds, the lights remain illuminated until the front panel has status information for all the lights.

The RS2000 is disabled every time the unit is powered up. The inverter must then be enabled. When a function is disabled, it is not allowed to occur and if it is occurring, it is terminated. Regardless of other conditions, the function will not be activated. For example, even if AC power is present, if the charger is disabled, the unit will not charge.

When a function is enabled, it is allowed to occur but other conditions may have to be met before the function is activated or turned on. For example, the charger function on the RS2000 may be enabled, but it will not charge unless qualified AC power is present.

2–4 975-0125-01-01