Xantrex Technology RS2000 manual Putting the System into Safe Mode, To return to Operate mode

	Operation
	In Safe mode, the RS2000 continues to communicate, but the inverting
	and charging functions are disabled.
When to use	Use Safe mode when you are adding or removing devices from the
	network. Authorized service personnel must also put the System Control
	Panel in Safe mode before performing software upgrades and diagnostics
	with the Xantrex Diagnostic Tool.
	If the System Control Panel is powered off while in Safe mode, it will be
	in Safe mode when it is powered up again.
	To return to Operate mode:
	◆ On the System Settings menu, under Desired Mode, select “Operate.”

Putting the System into Safe Mode

When you are installing or removing devices from the Xanbus system, putting the system into Safe mode prevents unexpected behavior.

To enter Safe mode:

1.On the Select Device menu, use the down arrow button to highlight System.

The cursor on the right of the screen indicates where you are in the menu.

Figure 2-5Select Device Menu

2.Press Enter.

The System Settings menu appears.

975-0125-01-01 2–9