DocuColor 2060 NPS/IPS on a Novell network
Using Novell forms to specify virtual printers
Novell allows the user to specify a form that has a name, number, length and width.
DocuColor 2060 NPS/IPS uses Novell form names to specify virtual printers.
•If a Novell user wishes to access a given virtual printer, a form with the same name as the virtual printer must be defined by the NetWare administrator. The user must specify that form for the job.
•The Novell system administrator must create form names to match the names of the DocuColor 2060 NPS/IPS virtual printers.
•The form name can have a maximum of twelve characters, and the first character must be alphabetic.
If a form name is not used, a virtual printer with the same name as the queue is used.
Forms are defined on the Novell server using the Novell PRINTDEF program. (Use a prefix such as “DP” to distinguish them from other form names.)
NOTE: DocuColor 2060 NPS/IPS is not using a form in the Novell sense. It reads the name field of the form specified, and interprets it as a DocuColor virtual printer. None of the form attributes other than name is read.
Remote printer (RPRINTER)
A Novell remote printer workstation (DocuColor 2060 NPS/IPS printer controller) is a vehicle for the print server to move print data to a printer that is not directly connected to the print server. The remote printer software runs on a workstation that connects to a remote printer through a parallel or serial port.
Installation Planning Guide |
