Installation
Installation Planning Guide 8-5
Ongoing maintenance
After the installation of your Xerox DocuColor 2060 NPS, there
are a few ongoing tasks that must be performed. These tasks
may include the following:
Maintaining an adequate inventory of consumable supplies
Overseeing routine maintenance and meter reporting
Arranging for additional operator training
Ordering additional fonts
Ordering additional documentation
Placing service calls for hardware problems
Obtaining assistance in solving software-related problems.
As installation coordinator, it is your responsibility to designate
the staff members responsible for these tasks.
Routine maintenance
A number of routine maintenance tasks must be performed to
ensure maximum efficiency of your printer. These tasks include:
Adding standard dry ink to your printer
Adding colored dry ink to your printer
Adding fuser lubricant
Replacing the dry ink and developer waste containers
Cleaning the exterior surfaces of the system.
Step-by-step instructions for performing these tasks are
contained in your

Guide to Performing Routine Maintenance

. You
need to decide how many operators will be responsible for
performing these tasks. Most maintenance tasks are covered in
the initial operator training provided shortly after installation.

NOTE: Only operators who have completed the Xerox

Advanced Customer Training (ACT) or eXcellerate courses or

equivalent advanced customer training can replace stitcher wire.

Refer to the “Xerox support services” appendix of this guide for

additional information on training.