
Defining the printer to the host: TCP/IP attachment
Infoprint Manager procedures for Windows NT and Windows 2000
This section explains how to access the Create Printer Wizard in the Infoprint Manager Administration GUI, which allows you to create an actual destination (physical printer) using Infoprint Manager for Windows NT and Windows 2000.
To create a PSF TCP/IP printer:
1.On the menu bar, click Printer, then Create, then PSF, then TCP/IP.
NOTE: If the TCP/IP is not shown in the menu, add it by selecting Printer, then Add/Remove Menu Items.
2.Provide information as prompted by the wizard. For assistance, refer to the Infoprint Manager Administration GUI online help.
NOTE: From the Model pulldown menu, make sure to select Infoprint 60 as your printer model.
3.If you did not enable the printer with the Create Printer Wizard, use the Infoprint Manager Administration GUI to enable it.
For detailed information on the attribute default values set by the wizard, refer to IBM Infoprint Manager for Windows NT and Windows 2000, Getting Started.
Installation Planning Guide |