Printer specifications and requirements
6-6 Installation Planning Guide
Space requirements
You should consider th e foll owing f actors wh en deciding w here to
place the printer hardware components:
Adequate work space and service clearance around the
equipment
Proximity to electrical and network connectors
Security of the work area. You may need to pla c e th e syste m
in an area where you can restrict access to it. This may be
important if your personnel need to print confidential
documents or if you are concerned with unauthorized usage.
Dimensions and weights of the printer components are listed in
this section, along with diagrams, to help you visualize the sizes
and total space requirements.
Printer placement
The following configurations are available for your Xerox
DocuColor 2060 NPS/IPS printer:
Standard printer with (three-tray) feeder
Standard printer with Tray 4 (high capacity feeder, or HCF)
Standard printer with High Capacity Stacker (HCS)
Standard printer with Tray 4 and High Capacity Stacker
(HCS)
Standard printer with High Capacity Stacker Stapler (HCSS)
Standard printer with Tray 4 and High Capacity Stacker
Stapler (HCSS)
Refer to the following table f or the dime nsions an d weigh ts of the
DocuColor 2060 NPS/IPS printer and accessories.
Table 6-3. Dimensions and weights
Component Width Depth Height Weight
Printer 92.3”/ 2380 mm 37.x”/ 950 mm 55.6”/ 1412 mm 1874.25 lbs./ 850
kg.
Tray 4 (HCF) 48.07”/ 1221 mm 29.53”/ 750 mm 55.6”/ 1412 mm 425 lbs./ 192.95 kg.
HCS 45.28”/ 1150 mm 26.77”/ 680 mm 43.70”/ 1100 mm 342 lbs./ 155 kg.
HCSS 35.2”/ 895 mm 24”/ 600 mm