Xerox 2060 manual Controller hardware specifications and requirements summary, 60 Hz, 50 Hz

Controller specifications and requirements

Controller hardware specifications and requirements summary

The following table summarizes the specifications and electrical requirements of your DocuColor NPS/IPS printer controller hardware components.

For a summary of printer hardware specifications and requirements, refer to the “Printer specifications and requirements” chapter of this guide. Contact your service representative if you have questions not specifically addressed in this guide.

Table 5-2.DocuColor NPS/IPS printer controller specifications and power

requirements

	Dimensions (depth,		Heat
Device	width, height)	Weight	dissipation	Power requirements	Cable lengths
Processor	d=25 in. / 63.5 cm	70 lbs. /	1,100 BTU	60 Hz:	Power: 8 ft. /
	w=10 in. / 25.4 cm	31.8 kgs	per hour	100 to 240 VAC,	2.4 m
				15 amp, 0.4 KVA,	Interface to
	h=17.75 in. / 45.1 cm			5-15 NEMA
					printer:
				50 Hz:
					20 ft. / 6.1 m
				100 to 240 VAC,
					usable length
				15 amp, 0.4 KVA
Monitor	d=10 in. / 25.4 cm	18 lbs. /	408 BTU	100-120 ~ VAC,	Video cable to
	w=17.5 in. / 44.5 cm	8.2 kg	per hour	1 phase, 50-60 Hz,	processor:
				3.0 amp, 0.4 KVA	46 in. / 1.17 m
	h=18.5 in. / 47 cm			200-240 ~ VAC,
				1 phase, 50-60 Hz,
				2.0 amp, 0.4 KVA
4 mm	d=12.25 in. / 31 cm	8 lbs. /	---	100-120/200-240 VAC,	SCSI cable to
cartridge	w=7.5 in. / 19 cm	6.6 kg		0.8/0.4 amp, 47-63 Hz	processor or
tape drive					additional SCSI
	h=2.75 in. / 7 cm				device:
					28 in. / 71 cm
Keyboard	d=7.5 in. / 19.1 cm	2 lbs. /	---	---	72 in. / 1.8 m
	w=20 in. / 50.8 cm	1kg
Mouse	d=3 in. / 8 cm	0.3 lbs. /	---	---	25 in. / 63 cm
	w=4 in. / 10 cm	0.14 kg
	h=2 in. / 5 cm

5-6 Installation Planning Guide