7.System connections
This chapter provides cable requirements for your DocuColor NPS/IPS system. To ensure all of your cable requirements are met, it is important to work with your Xerox representative.
Cable lengths
Cable lengths are important considerations in planning your layout, as components can be separated only up to the length of the data interface cables that connect them.
Cables supplied with the printer are long enough to meet the needs of most installations. Some of these cables are specific lengths to conform to engineering and safety standards.
Data cables The printer components can be separated up to the length of the data interface cables that connect them. The printer and controller are connected by a
Power cables Power cable lengths for the 60 Hz environment are as follows:
Table 7-1. Power cable lengths
Power cable | Length |
|
|
|
|
Printer controller | 8 feet / 2.4 meters |
|
|
Printer | 10 feet / 3 meters |
|
|
Table
Power cables | Length |
|
|
|
|
Printer controller | 15 feet / 4.6 meters |
|
|
Peripheral cabinet | 15 feet / 4.6 meters |
|
|
Printer | 15 feet / 4.6 meters |
|
|
Installation Planning Guide |
