Defining the channel-attached printer to the host

Infoprint Manager procedures for AIX

There are five versions of PSF/6000 or Infoprint Manager for

AIX:

Versions 1.1, 1.2, and 2.1

These earlier versions are called PSF/6000.

Versions 3.1 and 3.2

These current versions are called Infoprint Manager for AIX.

There are three different methods for creating printers:

System Management Interface Tool (SMIT)

All five versions of PSF/6000 and Infoprint Manager for AIX support this method.

Command line interface

All five versions of PSF/6000 and Infoprint Manager for AIX support this method.

Visual System Management (VSM)

This is a graphical user interface (GUI) supported by Infoprint

Manager for AIX versions 3.1 and 3.2 only.

NOTE: Regardless of the method used, from the Model pulldown menu, make sure to select Infoprint 60 as your printer model.

For detailed information on setting the attribute default values using any of these methods, refer to the appropriate section of the document, IBM Infoprint Manager for AIX, Getting Started.

Installation Planning Guide

E-5

Page 159
Image 159
Xerox 2060 manual Infoprint Manager procedures for AIX