Preparing for installation

Customer responsibilities

Your responsibilities prior to, during, and after installation of the DocuColor 2060 NPS/IPS system are to schedule and monitor your installation activities. Refer to the “DocuColor 2060 NPS/ IPS installation planning checklist” and the “Network preinstallation checklist” in this chapter for a complete list of responsibilities.

Refer to the “Xerox support services” appendix for information on services designed to support you prior to, during, and after your installation.

Site personnel

Identify the person (or persons) at your site who will be the primary interface with Xerox.

After the installation of your DocuColor 2060 NPS/IPS, there are a few ongoing tasks that must be performed. These tasks may include all or some of the following:

Meter reading and reporting

Overseeing routine maintenance

Placing service calls for hardware problems

Ordering additional documentation, software, or fonts

Arranging additional operator training

Maintaining an adequate inventory of consumable supplies.

It is your responsibility to designate a person (or persons) to perform these tasks.

Operator and Administrator training

Select personnel for Operator and Administration training.

Set up a training schedule.

Site preparation

Select and prepare the site for DocuColor 2060 NPS/IPS system installation including proper power, air conditioning, and work space.

Plan and schedule installation activities.

For channel-attached systems: Provide your host channel address to your Xerox representative.

Installation Planning Guide

4-3

Page 65
Image 65
Xerox 2060 manual Customer responsibilities, Site personnel, Operator and Administrator training, Site preparation