System connections

WARNING

Using an inappropriate alternate cable may degrade the performance of your equipment and may also be hazardous.

NOTE: Cable length loss must be factored in if equipment is installed in a raised-floor environment. You should also consider that part of the length of a cable is routed inside the equipment to connect with interior power or data receptacles.

Cable locations

To run the cables beneath the flooring effectively, it is necessary to know where the cables enter and exit the printer. The following diagrams show those locations (marked with an X).

All power cords attach to the back of the printer. Listed below are the distances of the printer power cord attachments from the left end of the printer as you face it.

1

 

 

 

 

 

4"/10 cm

 

 

 

 

 

x 4"/10 cm

2

Figure 7-1. Cable enter/exit location (top view)

1.Back of system

2.Front of system

7-2

Installation Planning Guide

Page 108
Image 108
Xerox 2060 manual Cable locations, Cable enter/exit location top view