Chapter 8 VLAN
Table 19 | Port Based VLAN Setup (continued) | |
label |
| Description |
|
|
|
Outgoing |
| These are the egress ports; an egress port is an outgoing port, that is, a port through |
|
| which a data packet leaves. If you wish to allow two subscriber ports to talk to each |
|
| other, you must define the egress port for both ports. CPU refers to the Switch |
|
| management port. By default it forms a VLAN with all Ethernet ports. If it does not |
|
| form a VLAN with a particular port then the Switch cannot be managed from that port. |
|
|
|
Apply |
| Click Apply to save your changes to the Switch’s |
|
| these changes if it is turned off or loses power, so use the Save link on the top |
|
| navigation panel to save your changes to the |
|
| configuring. |
|
|
|
Cancel |
| Click Cancel to begin configuring this screen afresh. |
|
|
|
| 103 |
|
|