Chapter 24 IP Source Guard
Figure 107 ARP Inspection VLAN Status
The following table describes the labels in this screen.
Table 75 ARP Inspection VLAN Status
LABEL | DESCRIPTION |
Show VLAN range | Use this section to specify the VLANs you want to look at in the section |
| below. |
|
|
Enabled VLAN | Select this to look at all the VLANs on which ARP inspection is enabled in |
| the section below. |
|
|
Selected VLAN | Select this to look at all the VLANs in a specific range in the section below. |
| Then, enter the lowest VLAN ID (Start VID) and the highest VLAN ID (End |
| VID) you want to look at. |
|
|
Apply | Click this to display the specified range of VLANs in the section below. |
|
|
VID | This field displays the VLAN ID of each VLAN in the range specified above. |
|
|
Received | This field displays the total number of ARP packets received from the |
| VLAN since the Switch last restarted. |
|
|
Request | This field displays the total number of ARP Request packets received from |
| the VLAN since the Switch last restarted. |
|
|
Reply | This field displays the total number of ARP Reply packets received from |
| the VLAN since the Switch last restarted. |
|
|
Forwarded | This field displays the total number of ARP packets the Switch forwarded |
| for the VLAN since the Switch last restarted. |
|
|
Dropped | This field displays the total number of ARP packets the Switch discarded |
| for the VLAN since the Switch last restarted. |
|
|
Use this screen to look at log messages that were generated by ARP packets and that have not been sent to the syslog server yet. To open this screen, click Advanced Application > IP Source Guard > ARP Inspection > Log Status.
| 213 |
|
|