Chapter 48 Interface Commands
• Set the outgoing traffic ports as the CPU (0), seven (7) and eight (8).
sysname(config)#
Syntax:
qos priority <0 .. 7>
where
<0 .. 7> | = Sets the quality of service priority for a port. |
An example is shown next.
•Enable ports one, three, four and five for configuration.
•Set the IEEE 802.1p quality of service priority as four (4).
sysname(config)# interface
Syntax:
name
where
= Sets a name for your port interface. |
An example is shown next.
•Enable port one for configuration.
•Set a name for the port.
sysname(config)# interface
Syntax:
400 |
| |
| ||
|
|
|