Chapter 5 Initial Setup Example

5.1.5 Enabling RIP

To exchange routing information with other routing devices across different routing domains, enable RIP (Routing Information Protocol) in the RIP screen.

1Click IP Application > RIP in the navigation panel.

2Select Both in the Direction field to set the Switch to broadcast and receive routing information.

3In the Version field, select RIP-1for the RIP packet format that is universally supported.

4Click Apply to save your changes back to the run-time

memory. Settings in the run-time memory are lost when the Switch’s power is turned off.

 

69

GS-4012F/4024 User’s Guide