Chapter 13 Broadcast Storm Control
The following table describes the labels in this screen.
Table 32 Advanced Application > Broadcast Storm Control
LABEL | DESCRIPTION |
Active | Select this check box to enable traffic storm control on the Switch. Clear this check |
| box to disable this feature. |
|
|
Port | This field displays the port number. |
|
|
* | Settings in this row apply to all ports. |
| Use this row only if you want to make some settings the same for all ports. Use this |
| row first to set the common settings and then make adjustments on a |
| basis. |
| Note: Changes in this row are copied to all the ports as soon as you |
| make them. |
|
|
Broadcast (pkt/s) | Select this option and specify how many broadcast packets the port receives per |
| second. |
|
|
Multicast (pkt/s) | Select this option and specify how many multicast packets the port receives per |
| second. |
|
|
DLF (pkt/s) | Select this option and specify how many destination lookup failure (DLF) packets |
| the port receives per second. |
|
|
Apply | Click Apply to save your changes to the Switch’s |
| loses these changes if it is turned off or loses power, so use the Save link on the top |
| navigation panel to save your changes to the |
| done configuring. |
|
|
Cancel | Click Cancel to reset the fields. |
130 |
| |
| ||
|
|
|