Chapter 45 Introducing Commands
Table 140 interface
COMMAND |
| DESCRIPTION | PRIVILEGE | |
| name |
| Sets a name for the port(s). Enter | 13 |
| string> |
| a descriptive name (up to nine |
|
|
|
| printable ASCII characters). |
|
| no | arp inspection | Disables this port from being a | 13 |
|
| trust | trusted port for ARP inspection. |
|
|
| arp inspection | Resets the ARP inspection rate to | 13 |
|
| limit | the default (0). |
|
|
| Disables bandwidth limit on the | 13 | |
|
|
| port(s). |
|
|
| Disables cir bandwidth limits on | 13 | |
|
| <cir> | the port(s). |
|
|
| Disables pir bandwidth limits on | 13 | |
|
| <pir> | the port(s). |
|
|
| Disables egress bandwidth limits | 13 | |
|
| <egress> | on the port(s). |
|
|
| Disables broadcast storm control | 13 | |
|
|
| limit on the port(s). |
|
|
| dhcp snooping | Disables this port from being a | 13 |
|
| trust | trusted port for DHCP snooping. |
|
|
| dhcp snooping | Resets the DHCP snooping rate | 13 |
|
| limit rate | to the default (0). |
|
|
| diffserv | Disables DiffServ on the port(s). | 13 |
|
| Disables destination lookup failure | 13 | |
|
|
| (DLF) on the Switch. |
|
|
| Disables the egress port setting. | 13 | |
|
| list> |
|
|
|
| ethernet oam | Disables Ethernet OAM on the | 13 |
|
|
| port(s). |
|
|
| ethernet oam mode | Resets Ethernet OAM mode to | 13 |
|
|
| the default setting (active) on the |
|
|
|
| ports. |
|
|
|
|
|
|
|
| ethernet oam | Disables Ethernet OAM remote | 13 |
|
|
| ||
|
| supported | port(s). |
|
|
| Disables flow control on the | 13 | |
|
|
| port(s). |
|
|
| Disables strict priority queuing on | 13 | |
|
|
| the Gigabit ports. |
|
|
| gvrp | Disable GVRP on the port(s). | 13 |
|
| Disables IGMP filtering. | 13 | |
|
| profile |
|
|
|
| Disables IGMP group limitation. | 13 | |
|
| Disables the IGMP immidiate | 13 | |
|
| leave | leave function. |
|
|
| inactive | Enables the port(s) on the Switch. | 13 |
| 371 |
|
|