ZyXEL Communications GS-4012 363

Chapter 45 Introducing Commands

Table 139 Command Summary: Configuration Mode (continued)

COMMAND			DESCRIPTION	PRIVILEGE
		no network <ip-	Deletes the OSPF network.	13
		addr/bits>
		no redistribute	Sets the Switch not to learn RIP	13
		rip	routing information.
		no redistribute	Sets the Switch not to learn static	13
		static	routing information.
		redistribute	Sets the Switch to learn RIP	13
		rip metric-type	routing information which will use
		<12> metric <0-	the specified metric information.
		65535>
		redistribute	Sets the Switch to learn static	13
		static metric-	routing information which will use
		type <12>	the specified metric information.
		metric <0-
		65535>
		passive-iface	Sets the interface to be passive.	13
		<ip-addr/bits>	A passive interface does not
			send or receive OSPF traffic.
	rip		Enables and enters the RIP	13
			configuration mode.
		exit	Leaves the RIP configuration	13
			mode.
	vrrp network <ip-		Adds a new VRRP network nd	13
	address>/<mask-		enters the VRRP configuration
	bits> vr-id <1-7>		mode.
	uplink-gateway
	<ip>
		exit	Exits from the VRRP command	13
			mode.
		inactive	Disables the VRRP settings.	13
		interval	Sets the time interval (in	13
		<1..255>	seconds) between Hello
			message transmissions.
		name <name	Sets a descriptive name of the	13
		string>	VRRP setting for identification
			purposes.
		no inactive	Activates this VRRP.	13
		no preempt	Disables VRRP preemption	13
			mode.
		no primary-	Resets the network to use the	13
		virtual-ip	default primary virtual gateway
			(interface IP address).
		no secondary-	Sets the network to use the	13
		virtual-ip	default secondary virtual
			gateway (0.0.0.0).
		preempt	Enables preemption mode.	13
		primary-	Sets the primary VRRP virtual	13
		virtual-ip <ip>	gateway IP address.