Chapter 49 IEEE 802.1Q Tagged VLAN Commands

The following example sets the default VID to 200 on ports 1 to 5.

sysname (config)# interface port-channel 1-5 sysname (config-interface)# pvid 200

49.3.2 Set Acceptable Frame Type

Syntax:

frame-type <alltaggeduntagged>

where

<alltagged

= Specifies all Ethernet frames (tagged and untagged), only tagged

untagged>

Ethernet frames or only untagged Ethernet frames.

This command sets the specified port to accept all Ethernet frames or only those with an IEEE 802.1Q VLAN tag.

The following example sets ports 1 to 5 to accept only tagged frames.

sysname (config)# interface port-channel 1-5 sysname (config-interface)# frame-type tagged

49.3.3 Enable or Disable Port GVRP

Use the gvrp command to enable GVRP on the port(s). Use the no gvrp command to disable GVRP.

The following example turns off GVRP for ports 1 to 5.

sysname (config)# interface port-channel 1-5 sysname (config-interface)# no gvrp

49.3.4 Modify Static VLAN

Use the following commands in the config-vlan mode to configure the static VLAN table. Syntax:

vlan <vlan-id> fixed <port-list> forbidden <port-list> name <name-str> normal <port-list> untagged <port-list> no fixed <port-list>

no forbidden <port-list> no untagged <port-list>

406

 

GS-4012F/4024 User’s Guide