Chapter 45 Introducing Commands
45.13 mvr Commands
The following table lists the mvr commands in configuration mode.
Table 143 Command Summary: mvr Commands
COMMAND |
| DESCRIPTION | PRIVILEG | |
| E | |||
|
|
|
| |
mvr <vlan- |
|
| Enters the MVR (Multicast | 13 |
id> |
|
| VLAN Registration) |
|
|
|
| configuration mode. |
|
| exit |
| Exist from the MVR | 13 |
|
|
| configuration mode. |
|
| group |
| Sets the multicast group range | 13 |
|
| for the MVR. |
| |
| <ip> |
|
|
|
| <ip> |
|
|
|
| inactive |
| Disables MVR settings. | 13 |
| mode <dynamic |
| Sets the MVR mode (dynamic | 13 |
| compatible> |
| or compatible). |
|
| name |
| Sets the MVR name for | 13 |
|
|
| identification purposes. |
|
| no | group | Disables all MVR group | 13 |
|
|
| settings. |
|
|
| group | Disables the specified MVR | 13 |
|
|
| group setting. |
|
|
| inactive | Enables MVR. | 13 |
|
| Disables the receiver port(s).An | 13 | |
|
| MVR receiver port can only |
| |
|
|
| receive multicast traffic in a |
|
|
|
| multicast VLAN. |
|
|
|
|
|
|
|
| Disables the source port(s).An | 13 | |
|
| list> | MVR source port can send and |
|
|
|
| receive multicast traffic in a |
|
|
|
| multicast VLAN. |
|
|
|
|
|
|
|
| tagged | Sets the port(s) to untag VLAN | 13 |
|
|
| tags. |
|
|
| Sets the receiver port(s).An | 13 | |
|
| MVR receiver port can only |
| |
|
|
| receive multicast traffic in a |
|
|
|
| multicast VLAN. |
|
|
|
|
|
|
|
| Sets the source port(s).An | 13 | |
|
| MVR source port can send and |
| |
|
|
| receive multicast traffic in a |
|
|
|
| multicast VLAN. |
|
|
|
|
|
|
| tagged <port- |
| Sets the port(s) to tag VLAN | 13 |
| list> |
| tags. |
|
|
| Sets the 802.1p priority for the | 13 | |
|
|
| packets belonging to this VLAN |
|
|
|
| group. |
|
|
|
|
|
|
376 |
| |
| ||
|
|
|