Chapter 9 Static MAC Forward Setup
The following table describes the labels in this screen.
Table 20 Advanced Application > Static MAC Forwarding
LABEL | DESCRIPTION |
Active | Select this check box to activate your rule. You may temporarily deactivate a rule |
| without deleting it by clearing this check box. |
|
|
Name | Enter a descriptive name for identification purposes for this static MAC address |
| forwarding rule. |
|
|
MAC Address | Enter the MAC address in valid MAC address format, that is, six hexadecimal |
| character pairs. |
| Note: Static MAC addresses do not age out. |
|
|
VID | Enter the VLAN identification number. |
|
|
Port | Enter the port where the MAC address entered in the previous field will be |
| automatically forwarded. |
|
|
Add | Click Add to save your rule to the Switch’s |
| rule if it is turned off or loses power, so use the Save link on the top navigation panel |
| to save your changes to the |
|
|
Cancel | Click Cancel to reset the fields to their last saved values. |
|
|
Clear | Click Clear to begin configuring this screen afresh. |
|
|
Index | Click an index number to modify a static MAC address rule for a port. |
|
|
Active | This field displays whether this static MAC address forwarding rule is active (Yes) or |
| not (No). You may temporarily deactivate a rule without deleting it. |
Name | This field displays the descriptive name for identification purposes for this static MAC |
| |
|
|
MAC Address | This field displays the MAC address that will be forwarded and the VLAN |
| identification number to which the MAC address belongs. |
|
|
VID | This field displays the ID number of the VLAN group. |
|
|
Port | This field displays the port where the MAC address shown in the next field will be |
| forwarded. |
|
|
Delete | Click Delete to remove the selected entry from the summary table. |
|
|
Cancel | Click Cancel to clear the Delete check boxes. |
106 |
| |
| ||
|
|
|