| Chapter 48 Interface Commands |
where |
|
pir <Kbps> | = Sets the maximum bandwidth allowed for incoming traffic. |
cir <Kbps> | = Sets the guaranteed bandwidth allowed for incoming traffic. |
egress <Kbps> | = Sets the maximum bandwidth allowed for outgoing traffic |
| (egress) on the Switch. |
An example is shown next.
•Enable port one for configuration.
•Enable bandwidth control.
•Set the outgoing traffic bandwidth limit to 5000Kbps.
•Set the guaranteed bandwidth allowed for incoming traffic to 4000Kbps.
•Set the maximum bandwidth allowed for incoming traffic to 8000Kbps.
sysname(config)# interface
The mirror command enables port mirroring on the interface.
Syntax:
mirror
mirror dir <ingressegressboth>
where
dir <ingressegressboth>
An example is shown next.
=Enables port mirroring for incoming, outgoing or both incoming and outgoing traffic.
Port mirroring copies traffic from one or all ports to another or all ports for external analysis.
•Enable port mirroring.
•Enable the monitor port 3.
•Enable ports 1, 4, 5 and 6 for configuration.
•Enable port mirroring on the ports.
| 397 |
|
|