Chapter 45 Introducing Commands

Table 140 interface port-channel Commands (continued)

COMMAND

 

DESCRIPTION

PRIVILEGE

 

 

ingress-check

Disables ingress checking on the

13

 

 

 

port(s).

 

 

 

intrusion-lock

Disables intrusion-lock on a port

13

 

 

 

so that a port can be connected

 

 

 

 

again after you disconnected the

 

 

 

 

cable.

 

 

 

 

 

 

 

 

ipmc egress-

Disables the port(s) from

13

 

 

untag-vlan <vlan-

removing specified VLAN tag from

 

 

 

id>

IP multicasting packets before

 

 

 

 

forwarding.

 

 

 

loopguard

Disables the loop guard feature

13

 

 

 

on the port(s).

 

 

 

mac-

Disables MAC authentication via

13

 

 

authentication

a RADIUS server on the port(s).

 

 

 

mirror

Disables port mirroring on the

13

 

 

 

port(s).

 

 

 

multicast-limit

Disables multicast limit on the

13

 

 

 

port(s).

 

 

 

trtcm

Disables 2-rate 3-color marking

13

 

 

 

on the port(s).

 

 

 

vlan-trunking

Disables VLAN trunking on the

13

 

 

 

port(s).

 

 

pvid <vlan-id>

 

The default PVID is VLAN 1 for all

13

 

 

 

ports. Sets a PVID in the range 1

 

 

 

 

to 4094 for the specified interface.

 

 

 

 

 

 

 

qos

priority <0 .. 7>

Sets the quality of service priority

13

 

 

 

for an interface.

 

 

speed-duplex

<auto10-half10-

Sets the duplex mode (half or

13

 

 

full100-

full) and speed (10, 100 or

 

 

 

half100-

1000 Mbps) of the connection on

 

 

 

full1000-full>

the interface. Selecting auto

 

 

 

 

(auto-negotiation) makes one port

 

 

 

 

able to negotiate with a peer

 

 

 

 

automatically to obtain the

 

 

 

 

connection speed and duplex

 

 

 

 

mode that both ends support.

 

 

 

 

 

 

 

spq

 

Sets the port(s) to use Strict

13

 

 

 

Priority Queuing.

 

 

trtcm

 

Enables Two Rate Three Color

13

 

 

 

Marker on the port(s).

 

 

 

cir <Kbps>

Sets the Commit Information Rate

13

 

 

 

on the port(s).

 

 

 

pir <Kbps>

Sets the Peak Information Rate

13

 

 

 

on the port(s).

 

 

 

dscp green <0-63>

DSCP value to use for packets

13

 

 

 

with low packet loss priority.

 

 

 

dscp yellow <0-

DSCP value to use for packets

13

 

 

63>

with medium packet loss priority.

 

 

 

dscp red <0-63>

DSCP value to use for packets

13

 

 

 

with high packet loss priority.

 

372

 

GS-4012F/4024 User’s Guide