Chapter 7 Basic Setting

Figure 31 Basic Setting > IP Setup

The following table describes the labels in this screen.

Table 11 Basic Setting > IP Setup

LABEL

DESCRIPTION

Default

Enter the IP address of the default outgoing gateway in dotted decimal notation, for

Gateway

example 192.168.1.254.

 

 

Domain Name

DNS (Domain Name System) is for mapping a domain name to its corresponding IP

Server

address and vice versa. Enter a domain name server IP address in order to be able to

 

use a domain name instead of an IP address.

 

 

Default

Specify which traffic flow (In-Bandor Out-of-band) the Switch is to send packets

Management

originating from itself (such as SNMP traps) or packets with unknown source.

 

Select Out-of-bandto have the Switch send the packets to the management port

 

labelled MGMT. This means that device(s) connected to the other port(s) do not

 

receive these packets.

 

Select In-Bandto have the Switch send the packets to all ports except the

 

management port (labelled MGMT) to which connected device(s) do not receive

 

these packets.

 

 

Management IP Address

Use these fields to set the settings for the out-of-band management port.

IP Address

Enter the out-of-band management IP address of your Switch in dotted decimal

 

notation. For example, 192.168.0.1.

 

 

IP Subnet

Enter the IP subnet mask of your Switch in dotted decimal notation for example

Mask

255.255.255.0.

 

 

Default

Enter the IP address of the default outgoing gateway in dotted decimal notation, for

Gateway

example 192.168.0.254

 

 

84

 

GS-4012F/4024 User’s Guide