Chapter 49 IEEE 802.1Q Tagged VLAN Commands

49.3.5 Delete VLAN ID

Syntax:

no vlan <vlan-id>

where

<vlan-id>

= The VLAN ID [1 – 4094].

This command deletes the specified VLAN ID entry from the static VLAN table. The following example deletes entry 2 in the static VLAN table.

sysname (config)# no vlan 2

49.4 Enable VLAN

Syntax:

vlan <vlan-id>

This command enables the specified VLAN ID in the SVLAN (Static VLAN) table.

49.5 Disable VLAN

Syntax:

vlan <vlan-id> inactive

This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.

49.6 Show VLAN Setting

Syntax:

show vlan

This command shows the IEEE 802.1Q Tagged SVLAN (Static VLAN) table. An example is shown next.

•VID is the VLAN identification number.

•Status shows whether the VLAN is static or active.

•Elap-Time is the time since the VLAN was created on the Switch.

408

 

GS-4012F/4024 User’s Guide