ZyXEL Communications GS-4012 manual 342

Chapter 45 Introducing Commands

Table 138 Command Summary: Enable Mode (continued)

COMMAND			DESCRIPTION	PRIVILEGE
		known-hosts	Displays known SSH hosts	3
			information.
		key	Displays internal SSH public and	3
		<rsa1rsadsa>	private key information.
		session	Displays current SSH session(s).	3
	subnet-vlan		Displays subnet based VLAN	3
			settings on the Switch.
	system-		Displays general system	0
	information		information.
	tacacs-server		Displays TACACS+ server	3
			settings.
	tacacs-accounting		Displays TACACS+ accounting	3
			server settings.
	time		Displays current system time and	3
			date.
	timesync		Displays time server information.	3
	trunk		Displays link aggregation	3
			information.
	version		Displays the firmware version	0
			running on the Switch.
		flash	Displays the firmware version on	0
			the flash memory of the Switch.
	vlan		Displays the status of all VLANs.	3
		<vlan-id>	Displays the status of the	3
			specified VLAN.
	vlan-stacking		Displays VLAN stacking settings.	3
	vlan1q	gvrp	Displays GVRP settings.	3
		port-isolation	Displays port isolation settings.	3
ssh	<12>		Connects to an SSH server with	0
	<[user@]dest-ip>		the specified SSH version.
		[command </>]	Connects to an SSH server with	0
			the specified SSH version and
			addition commands to be
			executed on the server.
test	interface port-		Performs an internal loopback test	13
	channel <port-		on the specified ports.
	list>
traceroute	<iphost-name>		Determines the path a packet	0
	[in-bandout-of-		takes to a device.
	bandvlan <vlan-
	id>][ttl <1-255>]
	[wait <1-60>]
	[queries <1-10>]
	help		Displays help information for this	0
			command.

342
	GS-4012F/4024 User’s Guide