Chapter 45 Introducing Commands
Table 139 Command Summary: Configuration Mode (continued)
COMMAND |
|
| DESCRIPTION | PRIVILEGE |
|
| Sets the default gateway’s IP | 13 | |
|
| <ip> | address for the |
|
|
|
| management port. |
|
| <ip> | Sets the IP address of a domain | 13 | |
|
|
| name server. |
|
| route | <ip> <mask> | Creates a static route. | 13 |
|
|
|
| |
|
| <ip> <mask> | Sets the metric of a static route | 13 |
|
| or deactivates a static route. |
| |
|
| [metric |
|
|
|
| <metric>] [name |
|
|
|
| <name>] |
|
|
|
| [inactive] |
|
|
| source binding |
| Creates a static binding for | 13 |
|
| DHCP snooping and ARP |
| |
|
| inspection. |
| |
|
| interface port- | Specifies the port(s) for this static | 13 |
|
| channel | binding. |
|
|
|
|
| |
lacp |
|
| Enables Link Aggregation | 13 |
|
|
| Control Protocol (LACP). |
|
| Sets the priority of an active port | 13 | ||
|
|
| using LACP. |
|
logins | username <name> |
| Configures up to four | 14 |
| password <pwd> |
| login accounts. |
|
| username <name> | privilege <0- | Assigns a privilege level to user | 14 |
|
| 14> | accounts. |
|
logout |
|
| Exits from the CLI. | 0 |
loopguard |
|
| Enables loopguard on the | 13 |
|
|
| Switch. |
|
mac- |
|
| Enables MAC authentication on | 13 |
authenticat |
|
| the Switch. |
|
ion |
|
|
|
|
| nameprefix <name- |
| Sets the prefix appended to the | 13 |
| string> |
| MAC address before it is sent to |
|
|
|
| the RADIUS server for |
|
|
|
| authentication. |
|
|
|
|
|
|
| password <name- |
| Sets the password sent to the | 13 |
| string> |
| RADIUS server for clients using |
|
|
|
| MAC authentication. |
|
| timeout |
| Specifies the amount of time | 13 |
|
|
| before the Switch allows a client |
|
|
|
| MAC address that fails |
|
|
|
| authentication to try and |
|
|
|
| authenticate again. |
|
|
|
| This settings is superseded by |
|
|
|
| the |
|
|
|
| command. |
|
| Sets learned MAC aging time. | 13 | ||
time |
|
|
|
|
| 349 |
|
|