Chapter 34 VRRP
34.4 VRRP Configuration Summary
To view a summary of all VRRP configurations on the Switch, scroll down to the bottom of the VRRP Configuration screen.
Figure 156 VRRP Configuration: Summary
The following table describes the labels in this screen.
Table 108 VRRP Configuring: VRRP Parameters
LABEL | DESCRIPTION |
Index | This field displays the index number of an entry. |
|
|
Active | This field shows whether a VRRP entry is enabled (Yes) or disabled (No). |
|
|
Name | This field displays a descriptive name of an entry. |
|
|
Network | This field displays the IP address and subnet mask of an interface. |
|
|
VRID | This field displays the ID number of a virtual router. |
|
|
Primary VIP | This field displays the IP address of the primary virtual router. |
|
|
Uplink Gateway | This field displays the IP address of the uplink gateway. |
|
|
Priority | This field displays the priority level (1 to 255) of the entry. |
|
|
Delete | Click Delete to remove the selected entry from the summary table. |
|
|
Cancel | Click Cancel to clear the Delete check boxes. |
|
|
34.5 VRRP Configuration Examples
The following sections show two VRRP configuration examples on the Switch.
34.5.1 One Subnet Network Example
The figure below shows a simple VRRP network with only one virtual router VR1 (VRID =1) and two switches. The network is connected to the WAN via an uplink gateway G (172.21.1.100). The host computer X is set to use VR1 as the default gateway.
272 |
| |
| ||
|
|
|