ZyXEL Communications GS-4012 20.2 Configuring Queuing

Chapter 20 Queuing Method

Click Advanced Application, Queuing Method in the navigation panel.

Figure 78 Queuing Method

The following table describes the labels in this screen.

Table 48 Queuing Method

LABEL	DESCRIPTION
Port	This label shows the port you are configuring.

Method	Select SPQ (Strict Priority Queuing) or WRR (Weighted Round Robin).
	Strict Priority Queuing (SPQ) services queues based on priority only. When the
	highest priority queue empties, traffic on the next highest-priority queue begins. Q7
	has the highest priority and Q0 the lowest.
	Weighted Round Robin Scheduling (WRR) services queues on a rotating basis
	based on their queue weight (the number you configure in the queue Weight field).
	Queues with larger weights get more service than queues with smaller weights.

Q0~Q7 Weight	When you select WRR, enter the queue weight here. Bandwidth is divided across
	the different traffic queues according to their weights. Queues with larger weights get
	more service than queues with smaller weights.

Apply	Click Apply to save your changes to the Switch’s run-time memory. The Switch
	loses these changes if it is turned off or loses power, so use the Save link on the top
	navigation panel to save your changes to the non-volatile memory when you are
	done configuring.

Cancel	Click Cancel to begin configuring this screen afresh.