Chapter 32 Differentiated Services
32.3 Activating DiffServ
Activate DiffServ to apply marking rules or IEEE 802.1p priority mapping on the selected port(s).
Click IP Application > DiffServ in the navigation panel to display the screen as shown.
Figure 141 IP Application > DiffServ
The following table describes the labels in this screen.
Table 96 IP Application > DiffServ
LABEL | DESCRIPTION |
Active | Select this option to enable DiffServ on the Switch. |
|
|
Port | This field displays the index number of a port on the Switch. |
|
|
* | Settings in this row apply to all ports. |
| Use this row only if you want to make some settings the same for all ports. Use this |
| row first to set the common settings and then make adjustments on a |
| basis. |
| Note: Changes in this row are copied to all the ports as soon as you |
| make them. |
|
|
Active | Select Active to enable DiffServ on the port. |
|
|
Apply | Click Apply to save your changes to the Switch’s |
| these changes if it is turned off or loses power, so use the Save link on the top |
| navigation panel to save your changes to the |
| configuring. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
32.3.1 Configuring 2-Rate 3 Color Marker Settings
Use this screen to configure TRTCM settings. Click the
254 |
| |
| ||
|
|
|