Chapter 27 RIP

Figure 118 RIP

The following table describes the labels in this screen.

Table 82

RIP

LABEL

DESCRIPTION

Active

Select this check box to enable RIP on the Switch.

 

 

Index

This field displays the index number of an IP interface.

 

 

Network

This field displays the IP interface configured on the Switch.

 

Refer to the section on IP Setup for more information on configuring IP domains.

 

 

Direction

Select the RIP direction from the drop-down list box. Choices are Outgoing, Incoming,

 

Both and None.

 

 

Version

Select the RIP version from the drop-down list box. Choices are RIP-1, RIP-2Band RIP-

 

2M.

Apply

Click Apply to save your changes to the Switch’s run-time memory. The Switch loses

 

these changes if it is turned off or loses power, so use the Save link on the top navigation

 

panel to save your changes to the non-volatile memory when you are done configuring.

 

 

Cancel

Click Cancel to begin configuring the fields again.

 

 

228

 

GS-4012F/4024 User’s Guide