Chapter 48 Interface Commands

where

 

 

<alltagged =

Choose to accept both tagged and untagged incoming frames, just

untagged>

tagged incoming frames or just untagged incoming frames on a port.

An example is shown next.

•Enable ports one, three, four and five for configuration.

•Enable ingress checking on the ports.

•Enable tagged frame-types on the interface.

sysname(config)# interface port-channel 1,3-5 sysname(config-interface)# ingress-check sysname(config-interface)# frame-type tagged

48.2.9 weight

Syntax:

weight <wt1> <wt2> ... <wt8>

where

<wt1> <wt2> ...

= Sets the interface WFQ weighting. A weight value of one to eight is

<wt8>

given to each variable from wt 1 to wt 8.

An example is shown next.

•Enable WRR queuing on ports 2 and 6 to 8.

•Enable port 2 and ports 6 to 8 for configuration.

•Set the queue weights from Q0 to Q7.

sysname# configure

sysname(config)# interface port-channel 2,6-8 sysname(config-interface)# wrr sysname(config-interface)# weight 8 7 6 5 4 3 2 1

48.2.10 egress set

Syntax:

egress set <port-list>

where

<port-list>

= Sets the outgoing traffic port list for a port-based VLAN.

An example is shown next.

•Enable port-based VLAN tagging on the Switch.

•Enable ports one, three, four and five for configuration.

 

399

GS-4012F/4024 User’s Guide