Chapter 45 Introducing Commands

45.12.1 User Mode

The following table describes the commands available for User mode.

Table 137 Command Summary: User Mode

COMMAND

 

DESCRIPTION

PRIVILEG

 

E

 

 

 

help

 

Displays help information.

0

logout

 

Exits from the CLI.

0

exit

 

Logs out from the CLI.

0

history

 

Displays a list of previously command(s) that you

0

 

 

have executed. The Switch stores up to 256

 

 

 

commands in history.

 

 

 

 

 

enable

 

Accesses Enable (or privileged) mode. See

0

 

Section 45.12.2 on page 334. Enable the highest

 

 

 

privilege level for executing commands.

 

 

 

 

 

 

<0-14>

Accesses Enable mode commands up to the

0

 

 

privilege level specified. See Section 45.12.2 on

 

 

 

page 334.

 

 

 

 

 

 

 

Accesses Enable (or privileged) mode. See

0

 

 

Section 45.12.2 on page 334.

 

 

 

 

 

show

ip

Displays IP related information.

0

 

hardware-monitor <CF>

Displays current hardware monitor information with

0

 

 

the specified temperature unit (Celsius C or

 

 

 

Fahrenheit F).

 

 

 

 

 

 

system-information

Displays general system information.

0

 

alarm-status

Display which alarms are enabled on the Switch as

0

 

 

well as the LED status of the alarms.

 

 

cpu-utilization

Display statistics about the utilization of the CPU

0

 

 

on the Switch.

 

 

version flash

Display the version of the currently installed

0

 

 

firmware on the flash memory.

 

 

version <cr>

Display the version of the currently running

0

 

 

firmware on the Switch.

 

ping

<IPhost-name>

Sends Ping request to an Ethernet device.

0

 

<IPhost-name> [vlan

Sends Ping request to an Ethernet device in the

0

 

<vlan-id>]

specified VLAN(s) with the specified parameters.

 

 

[size <0-1472>]

 

 

 

[-t]

 

 

 

help

Displays command help information.

0

traceroute

<iphost-name>

Determines the path a packet takes to a device.

0

 

<iphost-name>

Determines the path a packet takes to a device in a

0

 

[vlan <vlan-id>]

VLAN.

 

 

[ttl <1-255>]

 

 

 

[wait <1-60>]

 

 

 

[queries <1-10>]

 

 

 

help

Displays command help information.

0

ssh

<12> <[user@]dest-ip>

Connects to an SSH server with the specified SSH

0

 

 

version.

 

 

333

GS-4012F/4024 User’s Guide