Chapter 45 Introducing Commands
45.12.2 Enable ModeThe following table describes the commands available for Enable mode.
Table 138 Command Summary: Enable Mode
COMMAND |
|
| DESCRIPTION | PRIVILEGE |
baudrate |
|
| Changes the console port speed. | 13 |
<12345> |
|
| Choices are 1 (9600), 2 (19200), |
|
|
|
| 3(38400), 4 (57600) and 5 |
|
|
|
| (115200). |
|
|
|
|
|
|
boot | config <index> |
| Restarts the system with the | 13 |
|
|
| specified configuration file. |
|
clear | arp inspection | filter | Delete all ARP inspection filters | 13 |
|
|
| from the Switch. |
|
| arp inspection | log | Delete all ARP inspection log | 13 |
|
|
| entries from the Switch. |
|
| arp inspection | statistics | Delete all statistics records of | 13 |
|
|
| ARP packets going through the |
|
|
|
| Switch. |
|
|
|
|
|
|
| arp inspection | statistics vlan | Delete statistics records of ARP | 13 |
|
| packets going through the Switch |
| |
|
|
| for the specified VLAN(s). |
|
| dhcp snooping | statistics | Delete all statistics records of | 13 |
| database |
| DHCP requests going through the |
|
|
|
| Switch. |
|
| loopguard |
| Clears all loopguard counters. | 13 |
configure |
|
| Accesses Configuration mode. | 13 |
|
|
|
| |
copy |
| Backs up running configuration to | 13 | |
| tftp <ip> |
| the specified TFTP server with the |
|
|
| specified file name. |
| |
|
| Clones (copies) the attributes | 13 | |
| interface port- |
| from the specified port to other |
|
| channel <port> |
| ports. |
|
|
|
|
| |
| Copies the specified attributes | 13 | ||
| interface port- | ....] | from one port to other ports. |
|
| channel <port> |
|
|
|
|
|
|
| |
| tftp | config <index> | Restores configuration with the | 13 |
|
| <ip> <remote- | specified filename from the |
|
|
| file> | specified TFTP server to the |
|
|
|
| specified configuration file on the |
|
|
|
| router. |
|
|
|
|
|
|
|
| flash <ip> | Restores firmware via TFTP. | 13 |
|
|
|
| |
disable |
|
| Exits Enable (or privileged) mode. | 13 |
enable |
|
| Accesses Enable (or privileged) | 0 |
|
| mode. Enables the highest |
| |
|
|
| privilege level for executing |
|
|
|
| commands. |
|
|
|
|
|
|
334 |
| |
| ||
|
|
|