Chapter 45 Introducing Commands
Table 138 | Command Summary: Enable Mode (continued) |
|
| ||
COMMAND |
|
|
| DESCRIPTION | PRIVILEGE |
|
|
| Accesses Enable mode | 0 | |
|
|
|
| commands up to the privilege |
|
|
|
|
| level specified. |
|
|
|
|
|
|
|
erase |
|
| Resets to the factory default | 13 | |
|
|
|
| settings. |
|
|
|
| help | Displays help information for this | 13 |
|
|
|
| command. |
|
|
|
| interface port- | Resets to the factory default | 13 |
|
|
| channel <port- | settings on a per port basis and |
|
|
|
| list> [bandwidth- | optionally on a per feature |
|
|
|
| limit...] | configuration basis. |
|
|
|
|
|
| |
|
|
|
|
|
|
ethernet |
| [<number of | Performs a loopback test from the | 13 | |
oam |
| test <port> | packets> [<packet | specified port, optionally specifies |
|
|
|
| size>]] | how many and the size of packets |
|
|
|
|
| sent in the loopback test. |
|
exit |
|
|
| Exits Enable (or privileged) mode. | 0 |
help |
|
|
| Displays help information. | 0 |
history |
|
|
| Displays a list of command(s) that | 0 |
|
|
|
| you have previously executed. |
|
|
| Removes all IGMP information. | 13 | ||
kick |
| tcp <Session ID> |
| Disconnects the specified TCP | 13 |
|
|
|
| session. |
|
logout |
|
|
| Exits Enable (or privileged) mode. | 0 |
|
|
| Clears the MAC address table. | 13 | |
|
|
| Removes all learned MAC | 13 | |
|
|
|
| address on the specified port(s). |
|
no |
| arp |
| Flushes the ARP table entries. | 13 |
|
| arp | inspection filter | Specify the ARP inspection record | 13 |
|
|
| you want to delete from the |
| |
|
|
| Switch. The ARP inspection |
| |
|
|
|
| record is identified by the MAC |
|
|
|
|
| address and VLAN ID pair. |
|
|
|
|
|
|
|
|
| interface | Clears all counters on the | 13 | |
|
|
|
| specified port. |
|
|
| logging |
| Disables syslog logging. | 13 |
ping |
|
|
| Sends Ping request to an Ethernet | 0 |
<IPhost- |
|
|
| device. |
|
name> |
|
|
|
|
|
|
| [vlan <vlan- |
| Sends Ping request to an Ethernet | 13 |
|
| id>][..] |
| device in the specified VLAN(s). |
|
reload |
| config <index> |
| Restarts the system and use the | 13 |
|
|
|
| specified configuration file. |
|
renew dhcp |
|
| Loads dynamic bindings from the | 13 | |
snooping |
|
|
| default DHCP snooping database. |
|
database |
|
|
|
|
|
| 335 |
|
|