Installation
Getting Started
To install your new MFP machine, follow the instructions from Unpacking to Setting the Fax Identification. You must complete these steps for your MFP machine to operate properly.
If you have purchased an option package for your MFP machine, refer to the documentation you received with that option.
Where to Install Your MFP Machine
-Install your MFP machine in a
-Allow several inches on each side of the MFP machine to ensure adequate ventilation.
-Make sure that both power and telephone outlets are available nearby.
-Choose a location where the relative humidity is between 20% and 80%, and where the temperature is between 10°C/50°F and 32°C/ 92°F.
Unpacking
Before you begin, be sure that all the items listed below are included in your package. Remove the contents from the carton and place them on a sturdy surface.
- | MFP unit |
|
|
- | Toner cartridge | - Image drum unit (inside MFP unit) | |
- | Power cord | - | Telephone line cord |
- | Paper tray/Copy stacker | - Setup Guide & Warranty booklet | |
- | Document Tray | - | Document Stacker |
- Unimessage Software
Refer to the illustrations in the Component Identification section.
Installation 13