7Enter the Location ID. This is a descriptive title up to 15 characters long. Refer to the instructions below.
To Do This | Use |
| |
Enter numbers | Numeric keypad (press once) | ||
Enter spaces | SPACE | ||
Enter hyphens | HYPHEN key |
| |
Enter alphabet characters | Locate the character you want on the numeric keypad. | ||
| Press that key repeatedly until the character appears. | ||
Enter a unique character | Press the 0/UNIQUE key repeatedly until the character | ||
| you want appears. | ||
| The following characters are available: ! @ \ “ _ % ~ # & | ||
| ‘ ( ) * + , | ||
| Note: Some unique characters can be entered using | ||
| |||
Enter two letters using | Press |
| to move to the next character. |
NO | |||
the same key. |
|
|
|
Move the cursor to make corrections.
YES
and
NO
8Press the START key. The display shows NO=<OR LOCATION>.
9Enter the alternate fax number. Refer to the instructions following Step 5.
10The display shows G3 COMMUN. SPEED [33.6K]. Press
to adjust the speed and | YES | to select it. |
11The display shows G3 ECHO PROTECTION [ON]. Press
to change the setting and | YES | to select it. |
NO
NO
12Press the START key to finish programming the
13To continue programming
14Lift off the plastic cover above the