2Plug the unattached end of the power cord into a grounded AC power outlet.
3Turn the power switch to ON.
The time and current answering mode appears on the display. Your MFP machine is now in standby mode, ready to send or receive faxes.
Tip: The LCD display does not immediately disappear if the power is turned off while idling in the Power Save mode. This is not a malfunction and the display disappears momentarily.
Loading Paper
Your MFP machine can hold up to 100 sheets of
Your MFP machine automatically reduces the vertical length of the page images it receives to fit on the paper loaded in your MFP machine (down to 75% of the original length). For example, if you are sent a document created originally on
Tip: Your MFP machine is set at the factory to use letter size paper. If you intend to use a different paper size, change the PAPER SIZE user function setting to match your new paper size. See the Programming chapter for instructions.
1Adjust the paper guides to the width of your paper.
Tip: Adjust the paper guide on the right side to the mark of the width of your paper. After completing paper setting (Item 3), the paper guide on the left side should be aligned to the paper’s width.