Sending Documents Requested by Another Fax Machine (Polling Transmission)
When you normally send faxes, you load documents into your MFP machine, select a location, and then press the START key to begin sending the documents.
However, sometimes it is more useful to be able to simply load your documents on your MFP machine and set it to wait for the receiving fax machine to call and collect them. This is called setting your MFP machine to be polled, or polling transmission.
Setting Your MFP Machine to be Polled
1Load your documents.
2Press the SELECT FUNCTION key.
3Press the 5/POLLING
TIN POLL.
4For standard polling, press NO . The MFP machine begins scanning the message into memory and completes the set up process for the polling text.
For Bulletin Polling, press YES . The display shows PERSONAL BOX NO. [ ]. Enter a mailbox number between 0 ~ 8.
Tip: With Bulletin Polling, a text message is stored in memory until you delete it. You can therefore conduct polling transmission as many times as you want.
Also, when using a box number, the remote fax must also be equipped with a box function. Set the box number to 0 for polling without a box number.