6/REPORT PRINT Key: Use this key to manually print reports from your MFP machine.
7/COUNTER DISPLAY Key: Your MFP machine keeps track of the number of pages it has printed in several ways. Use this key to check your MFP machine’s print counter and the scan counter. It can also be used to reset your MFP machine’s drum counter after replacing the image drum unit.
8/LOCATION PROG. Key: Use this key to program your MFP machine’s
9/USER PROG. Key: Use this key to program your MFP machine’s identification information, to set your MFP machine’s clock, to set up mailboxes for confidential message reception, and to change your MFP machine’s function settings.
10/PRINTER CLEANING Key: Use this key to print a cleaning page for clearing accumulated toner from your MFP machine’s image drum.
Signal Tones
Your MFP machine emits a number of sounds to inform you of specific conditions.
Key Select Tone: This is a short beep that is generated each time that you press a key.
Error Tones: If you press a wrong or inappropriate key, your MFP machine emits three short beeps. If your MFP machine experiences a problem during communications, it emits five long beeps. Press the STOP key to turn the error tone off, then print a Message Confirmation Report to check the source of the problem (to do this, press the COPY key twice with no documents loaded).
Voice Request Tone: During a fax session, either you or the person at the remote fax machine may initiate a voice request. When the person at the remote fax machine either initiates or answers your voice request, your MFP machine emits a repetitive warbling sound.
End of Session Tone: At the end of every successful fax session, your MFP machine emits a beep to inform you that there were no errors or problems in the communication.