7Using the numeric keypad, enter the time on which you wish the transmission to begin.
Tip: Be sure to enter the time using the
8Press YES . The display shows SELECT LOCATIONS.
9Select a location. Refer to the instructions below.
To Select Using | Do This |
A | Press the |
An Auto Dial number | Press the AUTO DIAL key, then enter the three digit |
| Auto Dial number on thenumeric keypad. |
A number dialed on | Dial as you would on a normal telephone. |
the numeric keypad |
|
10Press the START key to finish the programming.
Canceling a Delayed Transmission
To cancel a delayed transmission from the document feeder or from memory before it has been sent, follow the instructions below.
1Press the STOP key. The display shows COMMUNICATION CAN- CEL.
2Press YES . The display shows the Location ID of the delayed transmission currently loaded in your MFP machine.
3 Press YES .
4If the delayed transmission was a feeder transmission, press the STOP key again to remove the document from the document feeder.