Initiating a Relay Broadcast
1Load your documents.
2Press the SELECT FUNCTION key.
3Press the 4/RELAY
RELAY PASSWORD.
4Using the numeric keypad, enter a password of up to 20 digits which is the same as the relay keyword programmed into the relay key station.
5Press the START key. The display shows REMOTE LIST NO.
6Using the numeric keypad, enter a number of up to 20 digits which corresponds to a relay group programmed into the relay key station.
7Press the START key. The display shows SELECT LOCATION.
8Select the location of the relay key station. Refer to the instructions below.
To Select Using | Do This |
A | Press the |
An Auto Dial number | Press the AUTO DIAL key, then enter the three digit |
| Auto Dial number on the numeric keypad. |
A number dialed on | Dial as you would on a normal telephone. |
the numeric keypad |
|
9Press the START key. Your MFP machine begins sending the fax.