Setting Language
Your MFP machine comes with two languages installed, which appear on the display and in reports. Follow the instructions below to switch lan- guages.
Tip: Your dealer may be able to provide you with additional languages.
SELECT
FUNCTION
+
9/SPACE
USER
PROG.
YES
+ 1 +
GHI
+ 1 + 4
14:USER LANGUAGE [ENG.] YES( ) NO( )
1Press the SELECT FUNCTION key.
2Press the 9/USER PROG.
3Press YES . The display shows FUNCTION NO. [ ].
4Using the numeric keypad, enter 14. This display shows USER LANGUAGE.
5Press NO to switch to the other installed language.
6 To accept the language change, press | YES | . |
7Press the SELECT FUNCTION key to finish.
Connecting to a PBX
A PBX (Private Branch Exchange) is a private telephone system used to route internal calls. If you have to dial a prefix (access) number to get an outside line, then your line is connected to a PBX.
If you are connecting your MFP machine to a PBX, follow the instructions below. These setting changes allow your MFP machine to identify your PBX’ outside line dial prefix digits in the numbers that you program or dial in your MFP machine. After it dials the prefix digits, your MFP machine waits until it sees that the outside line is available before dialing the rest of the number.