Advanced Operations
Sending a Fax at a Later Date and Time
The delayed transmission feature allows you to send documents at a specified date and time, and frees you from the need to manually start the transmission. You can program a transmission delay to occur at any time on the day of your transmission, or at any time over the next three days.
You can program your MFP machine to send one delayed fax at a time either from the document feeder or from memory. Refer to the table below to decide which method you want to use.
Delayed TX Feature/Limitation | From Feeder | From Memory |
Number of locations | One | Multiple |
Fax machine can be used for other |
|
|
transmissions while a delayed fax |
|
|
is waiting to be sent? | No | Yes |
Sending a Delayed Fax from the Document Feeder
Note: In order to send a delayed fax from the document feeder, function 17: MEM./FEED S/W must be set to Feed and funtcion 25:INSTANT DIAL must be set to Off.
SELECT
FUNCTION
+
1
DELAYD
TX
DELAYED TX DATE [07/01] YES( ) NO ( )
1Load your documents.
2Press the SELECT FUNCTION key.
3Press the 1/DELAYED TX
4Press NO . The display shows DELAYED TX DATE or, if the
transmission is to occur on the same day, press | YES | and go to |
Step 6. |
|
|