5After the display clears, enter the full telephone number of your MFP machine using the numeric keypad.
Tip: Use the Hyphen key to enter a “+” character before the num- ber, and use the Space
6Press the START key to save your entry.
7Enter your Sender ID. This is a descriptive title up to 32 characters long. Refer to the instructions below.
To Do This | Use |
Enter numbers | Numeric keypad (press once) |
Enter spaces | 9/SPACE |
Enter hyphens | HYPHEN key |
Enter alphabet characters | Locate the character you want on the numeric keypad. |
| Press that key repeatedly until the character appears. |
Enter a unique character | Press the 0/UNIQUE key repeatedly until the character |
| you want appears. |
| The following characters are available: ! @ \ “ _ % ~ # |
| & ‘ ( ) * + , |
| Note: Some unique characters can be inputted using |
|
Move the cursor to make corrections.
YES
and
NO .
8Press the START key to save your entry. The display shows NO=<CALL BACK NO.>.
9After the display clears, use the numeric keypad to enter the tele- phone number you want to use for call back messages. Enter up to 20 characters.
Tip: Use the HYPHEN key to enter a “+” character before the number, and use the SPACE
10Press the START key to save your entry.
11Press the SELECT FUNCTION key to finish.