Closing a Mailbox
To change the password of an existing mailbox, or to delete one, follow the instructions below. Remember that a mailbox must be empty before you can modify or delete it.
1Press the SELECT FUNCTION key.
2Press the 9/USER PROG.
FUNC. PROGRAMMING.
3Press 5 on the numeric keypad. The display shows 5: PERSONAL BOX PROG.
4Press
YES
. The display shows PERSONAL BOX NO. [ ].
5Using the numeric keypad, enter the number of the mailbox you want to modify or delete.
6The display shows PERSONAL BOX [CONF]. Press
YES
.
To close a mailbox, press | NO | until CLOSE appears in brackets. |
The display asks DELETE PERSONAL BOX? Press YES .
Tip: If the message, ILLEGAL OPERATION is displayed, the mailbox you have selected contains one or more messages. You must print out any messages in the mailbox before you change its password.
To Change Your Password
1Press the SELECT FUNCTION key.
2Press the 9/USER PROG.
FUNC. PROGRAMMING.
3Press 5 on the numeric keypad. The display shows 5: PERSONAL BOX PROG.
4Press YES . The display shows PERSONAL BOX NO. [ ].
5Using the numeric keypad, enter the number of the mailbox you want to modify or delete.
6The display shows PERSONAL BOX [CONF]. Press display shows PRG. PASSWORD.
YES
. The
7Using the numeric keypad, enter the
8Press NO . The display shows PRG. PASSWORD again.
9To create a new password, enter a new