No Toner Reception
If the user setting No. 22 (NO TONER MEM. RX) is set to ON and your MFP machine is low on toner, it displays a TONER LOW, REPLACE TONER CART. message, and begins receiving data into memory (rather than risk printing an unreadable message). If your MFP machine has received a message in memory because toner is low, MSG. IN MEMORY appears on the display. To print out a message stored in memory when toner is running low, follow the instructions below.
SELECT |
| 2 |
|
|
FUNCTION |
| PRINT MEMORY MSG. ? | ||
+ |
| |||
|
| YES( | ) NO( ) | |
|
|
| ||
|
|
|
|
OPERATION
1Press the SELECT FUNCTION key.
2Press the 2/PRINT OPERATION
3Press
YES
. The stored message begins printing.
Tip: If a memory reception password has been set, you need to enter your password.
Tip: Even if you see a TONER LOW message on your MFP ma- chine, you may be able to use the 2/PRINT OPERATION One- Touch key to continue printing faxes, but the print quality cannot be guaranteed. Replace your toner cartridge as soon as possible.
Canceling Messages Stored in Memory
It is also possible to erase messages received in memory without printing them.
1After you have followed the instructions to print out messages stored in memory, the display shows MSG. IN MEMORY, PRINT- ING.
2To erase the message instead of printing it, press the STOP key. The display shows CANCEL?
3Press YES memory.
to erase the message from your MFP machine’s
Basic Operations 47