Stopping a Transmission
To stop a transmission while it is in progress, follow the instructions below.
1Press the STOP key twice. The display shows STOPPED.
2If documents are stuck partway through the document feeder, you may see a RELOAD DOCUMENT message on the display. Press the STOP key again. Your MFP machine feeds the document the rest of the way through the document feeder.
Sending a Fax to Multiple Locations (Broadcasting)
Your MFP machine’s broadcasting feature allows you to send a document to many different locations at the same time. For each broadcast opera- tion, you can select as many One Touch keys, groups, and Auto Dial Codes as you like. You can also manually enter up to ten telephone numbers on the numeric keypad.
Performing a Broadcast Operation
1Load your documents.
2Select a location. Refer to the instructions below.
To Select Using | Do This |
A One Touch key | Press the One Touch key. |
An Auto Dial number | Press the AUTO DIAL key, then enter the two digit |
| Auto Dial number on the numeric keypad. |
A group | Using the numeric keypad, press the # key, then enter |
| the number of the group. |
A number dialed on the numeric keypad
Dial the number as you would on a normal telephone, then press START.
3Select another location within 3 seconds after step 2.
4Repeat steps 2 and 3 as often as necessary to continue selecting locations.
5When you are finished selecting locations, press START. ENTRY IS OK? displays.
6Press START. Your MFP begins scanning the document and dialing the numbers.
Basic Operations 43